Indexa app-überwachung ac 50

Bitte installiere einen neuen Browser

There is no power in the control panel. Maybe the batteries in the control panel are run down or have been removed. The batteries are used up. In order to remove the device from the ceiling, push it into the direction of the power supply at one side of the device until you can hear a "click". In full screen mode, the incorrect channel is selected. Select the desired camera.

Rauchmelder

Check that the Power LED [23, see manual] on the corresponding camera lights. If not, check the mains adapter and cable connection. The camera and monitor are not paired.

Indexa app-überwachung ac 50

Pair camera and monitor. The camera is out of range. Use an antenna extension cable see manual chapter 18 Reduce the distance between camera and receiver.

Objects are preventing the wireless connection. The antenne is not firmly attatched or both are not parallel to each other. Connect the antenna [35] tightly and position both antennas parallel to each other, eg.


  • Funk-Türsprechanlagen, Funk-Video-Türsprechanlagen, App-Türsprechanlage.
  • ortung beim iphone 7 Plus ausschalten.
  • whatsapp chat verlauf ausspionieren.

The camera channel is not activated. Activate the required camera channel. Monitor and camera are too far apart.

INDEXA DF270K Zusatz-Funk-Ueberwachungskamera 27276

Reduce the distance between camera and monitor. The antennas are not parallel. Position the antennas parallel to each other. The wireless connection is blocked. There's an interference with the wireless signal. Check that there are no interference sources near camera and receiver egWLAN Router, elektrical produvts, Microwave ovens. The battery is discharged.

Connect the mains adapter. The camera channels are not activatedd or have no connection. Pleasesee the points "The camera image does not appear on the screen" and "The wireless reception is unstable" above. Insert a readable and unlocked micro SD-card and format it. There's an overexposure due to a strong light source. There ist a strong lightsource shining into the camera lens. The micro SD-card is locked. This can be due to motion from trees or plants, light or shadow, snow or rain etc.

The settings are probably incorrect. Check the following points: Check the date and time setting and correct if necessary Check the setting for recording type and correct if necessary Check the motion sensitivity and correct if necessary Check the masked area and correct if necessary. The software hangs. The line is caused by the mechanical filter sticking. This is caused by the mechanical filter sticking. As sending mails with DF works best in combination with Gmail accounts, we suggest to create a Gmail account and to use the following settings for your Gmail account.

In full screen mode, probably the incorrect channel is selected. Check that the Power LED [16, see manual] on the corresponding camera lights. Use an antenna extension cable see manual, chapter 17 or reduce the distance between camera and receiver.

Stöbern in Kategorien

Objects are preventing wireless connection. The antenna is not firmly attatched or both are not parallel to each other.

Videoset INDEXA DW600 - HD Kameras

Connect the antenna [28, see manual] tightly and position both antennas parallel to each other, eg. Monitor and camera too far apart. The power safe mode is selected. The camera channel has not been selected or the cameras have no connection. See points "The camera image does not appear on the screen" and "The wireless reception is unstable" above. There's no SD card inserted. Insert a readable and unlocked SD card and format it. The SD card is locked. Unlock the SD card. The SD card is full. Format the SD card see manual chapter Probably the touch screen auto-lock is enabled.

Indexa - Elektroprofishop

The reason could be motion from trees or plants, light or shadow, snow or rain etc. Activate the push notification see manual chapter The corresponding storage is not connected with the smart recorder. Connect the storage with the smart recorder. The incorrect camera or camera channel has been selected or the selected camera or camera channel has no recordings.

Select the correct camera or camera channel. The router is not yet connected with the internet. Please connect the router with the internet takes approx. You need a data speed of 1. Please connect your mobile device with the internet. Your mobile device is not compatible with the requirements for the App. Activate the desired camera channel see manual chapter The camera is not paired with the smart recorder. Pair camera and smart recorder. Use an antenna extension cable see manual chapter 17 or reduce the distance between camera and smart recorder.

Connect the antennas tightly and position both parallel to each other, eg. Smart recorder and camera are too far apart. Reduce the distance between camera and smart recorder. Check that there are no interference sources near camera and smart recorder e.

WLAN router, electrical products, microwave ovens. Cameras are not activated or have no connection. With an iphone, the app can only be displayed in the landscape format. No storage is connected. Connect the storage and format it see manual chapter Unlock the SD-card. The storage is full.

Format or replace the storage or activate the ring storage function see manual chapter The reason can be motion from trees or plants, light or shadow, snow or rain etc. For a proper functioning, USB sticks should not be used with the recorder. The smart recorder is not connected with the router.